USNS MONTFORD POINT - Findings

Showing 50 of 192 findings (filtered) View Documentation Status (90 tracked)

Vuln ID	Severity	Asset	STIG	Title	Doc Status
V-225223	CAT II	MONT-WS-92040	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-WS-92040/Checklist/MONT-WS-92040_DotNET4_V2R7_20251023-142306.ckl Scan Date: 2026-01-14T12:57:25.530570 Technology Area: Windows Operating System
V-225223	CAT II	MONT-WS-92010	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-WS-92010/Checklist/MONT-WS-92010_DotNET4_V2R7_20251023-141005.ckl Scan Date: 2026-01-14T12:57:27.786540 Technology Area: Windows Operating System
V-225223	CAT II	MONT-VSF-004	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-VSF-004/Checklist/MONT-VSF-004_DotNET4_V2R7_20251023-143711.ckl Scan Date: 2026-01-14T12:57:29.485524 Technology Area: Windows Operating System
V-225223	CAT II	MONT-VSF-003	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-VSF-003/Checklist/MONT-VSF-003_DotNET4_V2R7_20251023-143732.ckl Scan Date: 2026-01-14T12:57:30.918773 Technology Area: Windows Operating System
V-225223	CAT II	MONT-MB-002	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: B3CB706A6ADDE1748C32DB756BC478CBF6005E4B ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification exists but no values were found within. Source: _Reviewed/MONT-MB-002/Checklist/MONT-MB-002_DotNET4_V2R7_20251023-152339.ckl Scan Date: 2026-01-14T12:57:32.355929 Technology Area: Windows Operating System
V-225223	CAT II	MONT-DP-001	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-DP-001/Checklist/MONT-DP-001_DotNET4_V2R7_20251023-143731.ckl Scan Date: 2026-01-14T12:57:34.683670 Technology Area: Windows Operating System
V-225223	CAT II	MONT-DC-003	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-DC-003/Checklist/MONT-DC-003_DotNET4_V2R7_20251023-171946.ckl Scan Date: 2026-01-14T12:57:36.663331 Technology Area: Windows Operating System
V-225223	CAT II	MONT-DB-002	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-DB-002/Checklist/MONT-DB-002_DotNET4_V2R7_20251023-143930.ckl Scan Date: 2026-01-14T12:57:38.504147 Technology Area: Windows Operating System
V-225223	CAT II	MONT-BE-002	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-BE-002/Checklist/MONT-BE-002_DotNET4_V2R7_20251023-143746.ckl Scan Date: 2026-01-14T12:57:39.853926 Technology Area: Windows Operating System
V-225223	CAT II	MONT-AP-002	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: _Reviewed/MONT-AP-002/Checklist/MONT-AP-002_DotNET4_V2R7_20251023-144010.ckl Scan Date: 2026-01-14T12:57:42.156893 Technology Area: Windows Operating System
V-225223	CAT II	MONT-SW-89108	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2510.0 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 12/17/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: MONT-SW-89108_DotNET4_V2R7_20251217-202821.ckl Scan Date: 2026-03-04T15:25:15.828600 Technology Area: Windows Operating System
V-225223	CAT II	MONT-SW-89134	Microsoft DotNet Framework 4.0 Security ...	Digital signatures assigned to strongly named asse...	-
Check Text Use regedit to review the Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. If the StrongName\Verification key does not exist, this is not a finding. If there are assemblies or hash values listed in this key, each value represents a distinct application assembly that does not have the application strong name verified. If any assemblies are listed as omitting strong name verification in a production environment, this is a finding. If any assemblies are listed as omitting strong name verification in a development or test environment and the IAO has not provided documented approvals, this is a finding. Fix Text Use regedit to remove the values stored in Windows registry key HKLM\Software\Microsoft\StrongName\Verification. There should be no assemblies or hash values listed under this registry key. All assemblies must require strong name verification in a production environment. Strong name assemblies that do not require verification in a development or test environment must have documented approvals from the IAO. Finding Details Evaluate-STIG 1.2510.0 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 12/17/2025 ResultHash: 540AD243F46DB5DD820AEE05A8F5EADCA3474F69 ~~~~~ HKLM:\SOFTWARE\Microsoft\StrongName\Verification does not exist Source: MONT-SW-89134_DotNET4_V2R7_20251217-201000.ckl Scan Date: 2026-03-04T15:25:41.864254 Technology Area: Windows Operating System
V-225224	CAT II	MONT-WS-92040	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-WS-92040/Checklist/MONT-WS-92040_DotNET4_V2R7_20251023-142306.ckl Scan Date: 2026-01-14T12:57:25.530570 Technology Area: Windows Operating System
V-225224	CAT II	MONT-WS-92010	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-WS-92010/Checklist/MONT-WS-92010_DotNET4_V2R7_20251023-141005.ckl Scan Date: 2026-01-14T12:57:27.786540 Technology Area: Windows Operating System
V-225224	CAT II	MONT-VSF-004	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-VSF-004/Checklist/MONT-VSF-004_DotNET4_V2R7_20251023-143711.ckl Scan Date: 2026-01-14T12:57:29.485524 Technology Area: Windows Operating System
V-225224	CAT II	MONT-VSF-003	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-VSF-003/Checklist/MONT-VSF-003_DotNET4_V2R7_20251023-143732.ckl Scan Date: 2026-01-14T12:57:30.918773 Technology Area: Windows Operating System
V-225224	CAT II	MONT-MB-002	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be OPEN on 10/23/2025 ResultHash: DF18BE85941E7EB1E368A5225EB42298CD0B88C1 ~~~~~ Username: MONTFORD-POINT\d.admin User SID: S-1-5-21-1360995287-4027491577-3040029667-1104 Profile Path: C:\Users\d.admin Value Name: State Value: 0x00023e00 [expected '0x00023c00'] Type: REG_DWORD Source: _Reviewed/MONT-MB-002/Checklist/MONT-MB-002_DotNET4_V2R7_20251023-152339.ckl Scan Date: 2026-01-14T12:57:32.355929 Technology Area: Windows Operating System
V-225224	CAT II	MONT-DP-001	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-DP-001/Checklist/MONT-DP-001_DotNET4_V2R7_20251023-143731.ckl Scan Date: 2026-01-14T12:57:34.683670 Technology Area: Windows Operating System
V-225224	CAT II	MONT-DC-003	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-DC-003/Checklist/MONT-DC-003_DotNET4_V2R7_20251023-171946.ckl Scan Date: 2026-01-14T12:57:36.663331 Technology Area: Windows Operating System
V-225224	CAT II	MONT-DB-002	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-DB-002/Checklist/MONT-DB-002_DotNET4_V2R7_20251023-143930.ckl Scan Date: 2026-01-14T12:57:38.504147 Technology Area: Windows Operating System
V-225224	CAT II	MONT-BE-002	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-BE-002/Checklist/MONT-BE-002_DotNET4_V2R7_20251023-143746.ckl Scan Date: 2026-01-14T12:57:39.853926 Technology Area: Windows Operating System
V-225224	CAT II	MONT-AP-002	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT A FINDING on 10/23/2025 ResultHash: 76CBF5A7C87686EA51FA77410808A92FDB3A947F ~~~~~ All user profiles have State configured to 0x00023c00 Source: _Reviewed/MONT-AP-002/Checklist/MONT-AP-002_DotNET4_V2R7_20251023-144010.ckl Scan Date: 2026-01-14T12:57:42.156893 Technology Area: Windows Operating System
V-225224	CAT II	MONT-SW-89108	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2510.0 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 12/17/2025 ResultHash: 131C51BE43E61BFBB569FDD5F046ADBBCD65A458 ~~~~~ This is a classified system so this requirement is NA. Source: MONT-SW-89108_DotNET4_V2R7_20251217-202821.ckl Scan Date: 2026-03-04T15:25:15.828600 Technology Area: Windows Operating System
V-225224	CAT II	MONT-SW-89134	Microsoft DotNet Framework 4.0 Security ...	The Trust Providers Software Publishing State must...	-
Check Text If the system or application being reviewed is SIPR based, this finding is NA. This check must be performed for each user on the system. Use regedit to locate "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State". If the State value for any user is not set to the hexadecimal value of 0x23C00, this is a finding. Fix Text This fix must be performed for each user on the system. Using regedit, change the hexadecimal value of the "HKEY_USER\[UNIQUE USER SID VALUE]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State" registry key to 0x23C00. Finding Details Evaluate-STIG 1.2510.0 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 12/17/2025 ResultHash: 131C51BE43E61BFBB569FDD5F046ADBBCD65A458 ~~~~~ This is a classified system so this requirement is NA. Source: MONT-SW-89134_DotNET4_V2R7_20251217-201000.ckl Scan Date: 2026-03-04T15:25:41.864254 Technology Area: Windows Operating System
V-225225	CAT II	MONT-WS-92040	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-WS-92040/Checklist/MONT-WS-92040_DotNET4_V2R7_20251023-142306.ckl Scan Date: 2026-01-14T12:57:25.530570 Technology Area: Windows Operating System
V-225225	CAT II	MONT-WS-92010	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-WS-92010/Checklist/MONT-WS-92010_DotNET4_V2R7_20251023-141005.ckl Scan Date: 2026-01-14T12:57:27.786540 Technology Area: Windows Operating System
V-225225	CAT II	MONT-VSF-004	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-VSF-004/Checklist/MONT-VSF-004_DotNET4_V2R7_20251023-143711.ckl Scan Date: 2026-01-14T12:57:29.485524 Technology Area: Windows Operating System
V-225225	CAT II	MONT-VSF-003	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-VSF-003/Checklist/MONT-VSF-003_DotNET4_V2R7_20251023-143732.ckl Scan Date: 2026-01-14T12:57:30.918773 Technology Area: Windows Operating System
V-225225	CAT II	MONT-MB-002	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-MB-002/Checklist/MONT-MB-002_DotNET4_V2R7_20251023-152339.ckl Scan Date: 2026-01-14T12:57:32.355929 Technology Area: Windows Operating System
V-225225	CAT II	MONT-DP-001	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-DP-001/Checklist/MONT-DP-001_DotNET4_V2R7_20251023-143731.ckl Scan Date: 2026-01-14T12:57:34.683670 Technology Area: Windows Operating System
V-225225	CAT II	MONT-DC-003	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-DC-003/Checklist/MONT-DC-003_DotNET4_V2R7_20251023-171946.ckl Scan Date: 2026-01-14T12:57:36.663331 Technology Area: Windows Operating System
V-225225	CAT II	MONT-DB-002	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-DB-002/Checklist/MONT-DB-002_DotNET4_V2R7_20251023-143930.ckl Scan Date: 2026-01-14T12:57:38.504147 Technology Area: Windows Operating System
V-225225	CAT II	MONT-BE-002	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-BE-002/Checklist/MONT-BE-002_DotNET4_V2R7_20251023-143746.ckl Scan Date: 2026-01-14T12:57:39.853926 Technology Area: Windows Operating System
V-225225	CAT II	MONT-AP-002	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-AP-002/Checklist/MONT-AP-002_DotNET4_V2R7_20251023-144010.ckl Scan Date: 2026-01-14T12:57:42.156893 Technology Area: Windows Operating System
V-225225	CAT II	MONT-SW-89108	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2510.0 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 12/17/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: MONT-SW-89108_DotNET4_V2R7_20251217-202821.ckl Scan Date: 2026-03-04T15:25:15.828600 Technology Area: Windows Operating System
V-225225	CAT II	MONT-SW-89134	Microsoft DotNet Framework 4.0 Security ...	Developer certificates used with the .NET Publishe...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. This requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups for the machine, run the following command: caspol.exe -m -lg Sample Results: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success Section 1.6 above indicates the presence of a publisher's key that meets the Publisher's Membership Condition and is also given full trust. If the Publisher Membership Condition is used on a nondefault Code Group and the use of that publisher's certificate is not documented and approved by the ISSO, this is a finding. Fix Text Trust must be established when utilizing Publishers Membership Condition. All publisher's certificates must have documented approvals from the ISSO. Finding Details Evaluate-STIG 1.2510.0 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 12/17/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: MONT-SW-89134_DotNET4_V2R7_20251217-201000.ckl Scan Date: 2026-03-04T15:25:41.864254 Technology Area: Windows Operating System
V-225226	CAT II	MONT-WS-92040	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-WS-92040/Checklist/MONT-WS-92040_DotNET4_V2R7_20251023-142306.ckl Scan Date: 2026-01-14T12:57:25.530570 Technology Area: Windows Operating System
V-225226	CAT II	MONT-WS-92010	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-WS-92010/Checklist/MONT-WS-92010_DotNET4_V2R7_20251023-141005.ckl Scan Date: 2026-01-14T12:57:27.786540 Technology Area: Windows Operating System
V-225226	CAT II	MONT-VSF-004	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-VSF-004/Checklist/MONT-VSF-004_DotNET4_V2R7_20251023-143711.ckl Scan Date: 2026-01-14T12:57:29.485524 Technology Area: Windows Operating System
V-225226	CAT II	MONT-VSF-003	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-VSF-003/Checklist/MONT-VSF-003_DotNET4_V2R7_20251023-143732.ckl Scan Date: 2026-01-14T12:57:30.918773 Technology Area: Windows Operating System
V-225226	CAT II	MONT-MB-002	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-MB-002/Checklist/MONT-MB-002_DotNET4_V2R7_20251023-152339.ckl Scan Date: 2026-01-14T12:57:32.355929 Technology Area: Windows Operating System
V-225226	CAT II	MONT-DP-001	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-DP-001/Checklist/MONT-DP-001_DotNET4_V2R7_20251023-143731.ckl Scan Date: 2026-01-14T12:57:34.683670 Technology Area: Windows Operating System
V-225226	CAT II	MONT-DC-003	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-DC-003/Checklist/MONT-DC-003_DotNET4_V2R7_20251023-171946.ckl Scan Date: 2026-01-14T12:57:36.663331 Technology Area: Windows Operating System
V-225226	CAT II	MONT-DB-002	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-DB-002/Checklist/MONT-DB-002_DotNET4_V2R7_20251023-143930.ckl Scan Date: 2026-01-14T12:57:38.504147 Technology Area: Windows Operating System
V-225226	CAT II	MONT-BE-002	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-BE-002/Checklist/MONT-BE-002_DotNET4_V2R7_20251023-143746.ckl Scan Date: 2026-01-14T12:57:39.853926 Technology Area: Windows Operating System
V-225226	CAT II	MONT-AP-002	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-AP-002/Checklist/MONT-AP-002_DotNET4_V2R7_20251023-144010.ckl Scan Date: 2026-01-14T12:57:42.156893 Technology Area: Windows Operating System
V-225226	CAT II	MONT-SW-89108	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2510.0 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 12/17/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: MONT-SW-89108_DotNET4_V2R7_20251217-202821.ckl Scan Date: 2026-03-04T15:25:15.828600 Technology Area: Windows Operating System
V-225226	CAT II	MONT-SW-89134	Microsoft DotNet Framework 4.0 Security ...	Encryption keys used for the .NET Strong Name Memb...	-
Check Text If the application is a COTS product, this requirement is Not Applicable (NA). The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Caspol.exe is a Microsoft tool used for working with .Net policy. Use caspol.exe to list the code groups and any publisher membership conditions. The location of the caspol utility is dependent upon the system architecture of the system running .Net. For 32 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319. For 64 bit systems, caspol.exe is located at %SYSTEMROOT%\Microsoft.NET\Framework64\v4.0.30319. Example: cd %SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319 To check code groups, run the following command: caspol.exe -all -lg Sample response: Microsoft (R) .NET Framework CasPol 4.0.30319.1 Security is ON Execution checking is ON Policy change prompt is ON Level = Machine Code Groups: 1. All code: Nothing 1.1. Zone - MyComputer: FullTrust (LevelFinal) 1.1.1. StrongName - 002400000480000094000000060200000024000052534131000400000100010007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E92EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293: FullTrust 1.1.2. StrongName - 00000000000000000400000000000000: FullTrust 1.2. Zone - Intranet: LocalIntranet 1.2.1. All code: Same site Web 1.2.2. All code: Same directory FileIO - 'Read, PathDiscovery' 1.3. Zone - Internet: Internet 1.3.1. All code: Same site Web 1.4. Zone - Untrusted: Nothing 1.5. (First Match) Zone - Trusted: Internet 1.5.1. All code: Same site Web 1.6. Publisher - 30818902818100E47B359ACC061D70C237B572FA276C9854CFABD469DFB74E77D026630BEE2A0C2F8170A823AE69FDEB65704D7FD446DEFEF1F6BA12B6ACBDB1BFA7B9B595AB9A40636467CFF7C73F198B53A9A7CF177F6E7896EBC591DD3003C5992A266C0AD9FBEE4E2A056BE7F7ED154D806F7965F83B0AED616C192C6416CFCB46FC2F5CFD0203010001: FullTrust Success An assembly will satisfy the StrongNameMembershipCondition if its metadata contains the strongly identifying data associated with the specified strong name. At the least, this means it has been digitally signed with the private key associated with the public key recorded in the policy. The presence of the encryption key values in the StrongName field indicates the use of StrongNameMembershipCondition. If a Strong Name Membership Condition is assigned to a non-default Code Group the private key must be adequately protected by the software developer or the entity responsible for signing the assemblies. Ask the Systems Programmer how the private keys are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. If the private key used to sign the assembly is not adequately protected, this is a finding. Fix Text Ask the Systems Programmer how the private keys used to sign the assembly are protected. Private keys are simply values stored as strings of data. Keys can be stored in files on the file system or in a centralized data repository. Adequate protection methods include, but are not limited to: - utilizing centralized key management; - using strict file permissions to limit access; and - tying strong pass phrases to the key. The private key(s) used to sign the assembly must be protected. Utilize centralized key management or strict file permissions along with strong pass phrases and/or other well-established industry practices for managing and controlling access to private keys. Finding Details Evaluate-STIG 1.2510.0 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 12/17/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: MONT-SW-89134_DotNET4_V2R7_20251217-201000.ckl Scan Date: 2026-03-04T15:25:41.864254 Technology Area: Windows Operating System
V-225227	CAT II	MONT-WS-92040	Microsoft DotNet Framework 4.0 Security ...	CAS and policy configuration files must be backed ...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Ask the System Administrator if all CAS policy and policy configuration files are included in the system backup. If they are not, this is a finding. Ask the System Administrator if the policy and configuration files are backed up prior to migration, deployment, and reconfiguration. If they are not, this is a finding. Ask the System Administrator for documentation that shows CAS Policy configuration files are backed up as part of a disaster recovery plan. If they have no documentation proving the files are backed up, this is a finding. Fix Text All CAS policy and policy configuration files must be included in the system backup. All CAS policy and policy configuration files must be backed up prior to migration, deployment, and reconfiguration. CAS policy configuration files must be included in disaster recovery plan documentation. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-WS-92040/Checklist/MONT-WS-92040_DotNET4_V2R7_20251023-142306.ckl Scan Date: 2026-01-14T12:57:25.530570 Technology Area: Windows Operating System
V-225227	CAT II	MONT-WS-92010	Microsoft DotNet Framework 4.0 Security ...	CAS and policy configuration files must be backed ...	-
Check Text The infrastructure to enable Code Access Security (CAS) exists only in .NET Framework 2.x-4.x. The requirement is Not Applicable (NA) for .NET Framework greater than 4.x. (Note: The infrastructure is deprecated and is not receiving servicing or security fixes.) Ask the System Administrator if all CAS policy and policy configuration files are included in the system backup. If they are not, this is a finding. Ask the System Administrator if the policy and configuration files are backed up prior to migration, deployment, and reconfiguration. If they are not, this is a finding. Ask the System Administrator for documentation that shows CAS Policy configuration files are backed up as part of a disaster recovery plan. If they have no documentation proving the files are backed up, this is a finding. Fix Text All CAS policy and policy configuration files must be included in the system backup. All CAS policy and policy configuration files must be backed up prior to migration, deployment, and reconfiguration. CAS policy configuration files must be included in disaster recovery plan documentation. Finding Details Evaluate-STIG 1.2507.5 (Scan-NETFramework4_Checks) found this to be NOT APPLICABLE on 10/23/2025 ResultHash: 0E4360D1A69538A55E456743C4260C8FCE83E079 ~~~~~ Installed .NET version is '4.8'. This check only applies to .NET version 4.0 specifically so this requirement is NA. Source: _Reviewed/MONT-WS-92010/Checklist/MONT-WS-92010_DotNET4_V2R7_20251023-141005.ckl Scan Date: 2026-01-14T12:57:27.786540 Technology Area: Windows Operating System

Page 1 of 4

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text

Finding Details

Check Text

Fix Text